Chargers & Connectors

Keep radios and cordless phones charged with this Motorola CLS multiunit charging station.

Prepare two-way radios for use with this CLS multiunit charging station. Six slots let you recharge multiple radios with one outlet to conserve space. This Motorola charging station copies settings from a single radio to a fleet of radios to save time when setting up.

Tripp Lite's 4-port VGA/SVGA video splitter provides bandwidth support at 350MHZ, allowing simultaneous display of video on up to 4 monitors.

Tripp Lite's 4-Port VGA/SVGA Video Splitter provides bandwidth support at 350MHZ, allowing simultaneous display of video on up to 4 monitors. In addition, a built-in booster allows a video signal (up to 2048 x 1536 @ 60Hz) to be transmitted up to 64 m (210-ft.) from the source. Four standard HD15 female ports are used to connect the monitors, while a fifth HD15 male port is used to connect the CPU. The splitter can be located up to 7.62 m (25-ft.) from the connected computer, and up to 56.3 m (185-ft.) from the connected monitors. The number of connected monitors can be expanded by cascading up to 3 levels of B114-004-R splitters together.

4XEM™ 30 Pin USB charger connects the iPad to a receiver with its composite connections and is featured with 3 RCA connectors.

4XEM™ 30 Pin USB cable avoids signal interference to deliver clear and accurate videos. Cable allows the user to plug into a computer with its 30 pin dock connector.